It is applied in the welding torch in manual welding operations and increases the welding quality.   It enables the welding torches to work without stopping in robot weldings and is used to prevent possible blockages in the wire bed. It is a high-resistance and long-lasting spray. It prevents the burrs sticking to the torch for a long time so increases productivity and provides an economical efficiency. It extends the torch life and after lubricating the applied surface, leaves a protective film layer on the surface. Due to its non-silicon-free nature, it makes it easier to paint the surface after welding. Silicone-free. It does not come off the surface. It forms a film layer, it is affordable and rarely used and increases the weld quality. Its lubricating property is high. It does not contain any harmful additives. This spray is resistant to high heat for a long time and prevents clinker adhesion to the torc. It prevents obstructions in the wire bed. Easy to use, time-saver. It provides continuous welding. It makes a thin transparent coating on the surface. The wire inside the torch prevents it from being worn out. It does not create any obstacle for painting in the welded parts. Spray it 20 cm (7.87 inch)away from the surface, wait 3 min for the welding operation.