This product creates pores on the surface by atomizing it in micronised ratio and covers it with phosphate for a better-holding paint. It is used in the cleaning of rust and mold residues caused by atmospheric conditions in ferrous metals, in the cleaning of various metal parts which are rusted due to various reasons after machining, in the cleaning of rust residues on metals such as copper, bronze, brass, iron, cleaning of oxide layer in cooling water systems, in the cleaning of rusty residues in radiator and engine systems of land and sea vehicles, in the cleaning of rust residues on painted, porcelain, fayan surfaces, in the cleaning of rust on the lashing tables of looms, injection presses and rubber presses. It is used for the cleaning of rust residues that occur in all kinds of metal parts that come out of machining.
In light dirt: 1 unit of product and 20 units of water are mixed. In medium dirt: 1 unit of product and 15 units of water are mixed. In heavy dirt: 1 unit of product and 5 units of water are mixed. Wiping, brushing or dipping method are applied to the surface. After cleaning, rinse the unwanted residues if needed. In the dipping method: 1/10 of product is used according to the water volume. Keeping the cleaning temperature at 55 C (149 F°). increases the cleaning power. Do not increase the cleaning temperature above 65 C° (155 °F). CAUTION: Do not use it on polished or chrome plated metal molds. CAUTION: The immersion tank must not be metal.
This product creates pores on the surface by atomizing it in micronised ratio and covers it with phosphate for a better-holding paint. It is used in the cleaning of rust and mold residues caused by atmospheric conditions in ferrous metals, in the cleaning of various metal parts which are rusted due to various reasons after machining, in the cleaning of rust residues on metals such as copper, bronze, brass, iron, cleaning of oxide layer in cooling water systems, in the cleaning of rusty residues in radiator and engine systems of land and sea vehicles, in the cleaning of rust residues on painted, porcelain, fayan surfaces, in the cleaning of rust on the lashing tables of looms, injection presses and rubber presses. It is used for the cleaning of rust residues that occur in all kinds of metal parts that come out of machining.
This product does not damage skin nor harm the metal and melts the rust in a short time. The field of use is very wide. Its diluted state is odorless. Very economical that's why very little quantitiy is sufficient for cleaning. It is concentrated and diluted with water. It roughens the applied surface and phosphates the surface on micron basis. In addition, it provides better adhesion of the paint. It does not contain any harmful additives. Suitable for ferrous and non-ferrous metals. Easy to use, and it saves time. It does not damage glass and tiles surfaces. It prepares the metal efficiently for painting. No residue remains on the surface after rinsing.
