It is not harmful to skin and does not damage metal. It melts rust in a short time. Field of use is very wide. The diluted form is odorless. Very economical, and used less. Diluted with concentrated water. Scratchs the applied surface. Phosphates the surface on the basis of micron. Allows the paint to stick better. It does not contain any harmful additive for health. Suitable for ferrous and non-ferrous metals. Easy to use, saves time. Does not damage glass or tile surfaces. Prepares the metal successfully for painting. Does not leave any residue on the surface after rinsing.
The skin will not hurt. It will not hurt the metal. Pash melts in a short time. Usage area is very wide. The diluted form is odorless. Very economical, less used. Concentrate diluted with water. It roughens the applied surface. Micron-based surface phosphates. It allows the paint to stick better. It does not contain harmful additives in health. It is suitable for ferrous and non-ferrous metals. Easy to use, save time. Glass and tiles do not damage the surfaces. They prepare the metal successfully for the color. Does not leave residues on the surface after rinsing
The skin will not hurt. It will not hurt the metal. Pash melts in a short time. Usage area is very wide. The diluted form is odorless. Very economical, less used. Concentrate diluted with water. It roughens the applied surface. Micron-based surface phosphates. It allows the paint to stick better. It does not contain harmful additives in health. It is suitable for ferrous and non-ferrous metals. Easy to use, save time. Glass and tiles do not damage the surfaces. They prepare the metal successfully for the color. Does not leave residues on the surface after rinsing
In case of light pollution: 1 unit product / 12 units of water are mixed. In medium pollution: 1 unit product / 6 unit water is mixed. In heavy pollution: 1 unit product / 3 units water are mixed. It is applied to the surface by wiping, brushing or dipping. After cleaning, unwanted residues are removed by rinsing if necessary. In dipping method: 1/10 ratio product is used according to the water volume. Keeping the cleaning temperature at 55 ° C increases the cleaning efficiency. Do not exceed the cleaning temperature above 65 ° C. CAUTION: Do not use on polished or chrome-plated metal molds. CAUTION: The dipping tank should not be metal.
